Quality check
corrosion test

Corrosion tests to verify the wear resistance of the material, which depends on the level of zinc deposit left on the item. Performed in the Angelantoni DCTC 600 P cabin, it allows to simulate the corrosive action in short times (accelerated aging) through a continuous spray of saline solution (1.2 ml / h on 80 cm² of surface) with humidified air at 35 ° and a PH which varies between 6.5 and 7.2. The processing complies with the DIN 50021 standard corresponding to the UNI ISO 9227 standard.